Dryer Repair Whirlpool WED4800XQ

Description of objects for repairing

Object:dryer Whirlpool, model WED4800XQ. Customer claim: gas dryer turns on but doesn’t dry things. Issue: the drying gas igniter is faulty. Equipment that were used in repairing works: a tool for disassembling household appliances, a new igniter for drying this model, technical documentation from Whirlpool for this type of device. Dryer repair in Chicago is one of our company’s priorities. Our specialists regularly improve their skills by attending master classes from world-famous manufacturers of this equipment. Therefore, they are aware of the nuances of devices from all well-known brands, including Whirlpool. In this case, the repair began with inspection and testing of the heating system. We know that this is a very common breakdown for machines of this type. We repair absolutely any problems in the operation of dryers. For more detailed information about our services for these devices, see this page: dryer repair chicago.

Repairing procedure

Safety First:

• Unplug the dryer from the power source.
• Turn off the gas supply to the dryer.

Access the Igniter and Gas Coils:

• Remove the front panel of the dryer by unscrewing the designated screws and lifting it off.

Locate the Igniter:

• Identify the igniter near the burner assembly.
• Disconnect any wires attached to the old igniter.

Remove the Igniter:

• Place the new igniter in the same position.
• Secure it in place using the appropriate screws or clips.

Locate the Gas Coils:

• Position the new valve where the old one was located.
• Reattach any wires or connectors to the new valve, ensuring they are in the same arrangement as before.
• Secure the valve to the dryer with screws or bolts.
• Reconnect the water inlet hose to the valve and tighten the clamp.

Testing the Dryer:

• The gas coils are typically situated on top of the gas valve assembly.

Remove the Gas Coils:

• Disconnect any wires attached to the old gas coils.
• Unscrew or unclip the old gas coils from the gas valve.

Install the New Gas Coils:

• Position the new gas coils on the gas valve.
• Secure them in place using the appropriate screws or clips.

Reassemble the Dryer:

• Attach the front panel back to the dryer.
• Secure the front panel with the designated screws.

Test for Functionality:

• Plug in the dryer.
• Turn on the dryer and check if the new igniter glows.
• Ensure the gas coils operate properly.

Here is a small photo report of the work carried out:

Morgan LLC Services for Chicago Residents