Washer Repair Samsung WFXYZ123

Description of objects for repairing

Object:washer Samsung, model WFXYZ123. Customer claim: the washing machine does not drain water. Issue: the drain pump has failed. Equipment that were used in repairing works: a tool for disassembling household appliances, a new drain pump for a washing machine of this model, technical documentation from Samsung for this type of device. Washing machine repair in Chicago is what Morgan Appliance Repair does. We have accumulated a lot of experience in this specific service. We keep abreast of innovations in the design of modern equipment. We also do everything to improve the quality of service for our customers by restoring broken household devices. Read more about this on the page of our website: washer repair chicago. In this case, the application was received for the breakdown of the Samsung WFXYZ123 washing machine. Our technician sorted out the problem very quickly. The fact is that the drain pump, which is responsible for draining the water, is broken. We quickly found the right part, delivered it and installed it. The washing machine immediately showed all signs of normal operation. The water drain worked and washing became possible. The client was satisfied!

Repairing procedure

Safety First:

• Unplug the washer from the power source before starting any repairs.

Access the Drain Pump:

• Open the washer’s front panel or rear access panel, depending on the model, by removing screws or clips.

Prepare for Valve Removal:

• Locate the water valve; it’s where the water inlet hose connects to the dryer.
• Place a towel or a shallow pan under the valve area to catch any water that may drip out when you disconnect the hose.

Locate the Drain Pump:

• Identify the drain pump, often situated near the bottom of the washer.

Disconnect Power:

• Ensure there is no power supply to the drain pump by disconnecting wires or unplugging connectors.

Remove Drain Hoses:

• Detach the drain hoses connected to the pump, and be prepared for any residual water.

Unscrew or Unclip the Pump:

• Depending on the model, unscrew or unclip the old drain pump from its mounting.

Install the New Drain Pump:

• Position the new drain pump and secure it in place.

Reconnect Drain Hoses:

• Attach the drain hoses to the corresponding ports on the new pump.

Reconnect Power:

• Ensure all electrical connections are secure.

Close the Panel:

• Secure the front or rear access panel back by tightening screws or reattaching clips.

Test the Washer:

• Plug in the washer and run a test cycle to check if the new drain pump operates properly.

Here is a small photo report of the work carried out:

Morgan LLC Services for Chicago Residents