Range Repair Viking VGRC48-6G

Range repair for Viking VEDO5302SS - February 6 by Morgan Appliance Repair in Chicago

Description of objects for repairing

Object: Viking Range, model VEDO5302SS. Customer claim: burner does not turn on. Problem: replacing the control board and door hinges. Equipment that was used during repair work:
  • a tool for disassembling household appliances, a new burner for a stove of this model, technical documentation from Viking for this type of device.
Range Repair in Chicago is the main focus of Morgan’s appliance repair company. In this case, we received a request for repair of Viking equipment. The stove did not turn on. Our inspection showed that in addition to electrical problems, there was also a mechanical problem – the rage door was broken. Therefore, our technician had to quickly find the cause of the malfunction and assess the possibility of repairing the door. Unfortunately, the latter was beyond repair. The hinges on the door needed to be replaced. Electrically there are also big problems – the motherboard of the rage is broken. We promptly ordered components and replaced them. We handled this application perfectly – the client was satisfied! Read more about repairs of similar devices in Chicago on the website: rage repair chicago

Repairing procedure

Step 1: Safety Precautions
  • Before starting, ensure the range is completely turned off and disconnected from the power source to prevent any electrical hazards.
  • Allow the range to cool down if it has been recently used to avoid burns.
Step 2: Gather Necessary Tools
  • You’ll typically need a screwdriver set (usually Phillips-head and possibly flat-head), work gloves, and possibly a flashlight for better visibility.
Step 3: Accessing the Control Board
  • Locate the control board in your range. It’s usually located behind the control panel or on the back of the range.
  • Depending on the model, you may need to remove the control panel or the rear panel to access the control board. Refer to the range’s manual for specific instructions on accessing internal components.
Step 4: Remove Control Panel or Rear Panel (if necessary)
  • If the control board is located behind the control panel, use the appropriate screwdriver to carefully remove the screws securing the panel in place. Once the screws are removed, gently lift and set aside the control panel, being mindful of any wires attached.
  • If the control board is located on the back of the range, follow the manufacturer’s instructions for safely removing the rear panel. This usually involves removing screws along the edges of the panel.
Step 5: Replace Control Board
  • Once the control board is accessible, take a picture of the wire connections or make a note of their positions for reassembly.
  • Carefully disconnect the wire harnesses or connectors attached to the control board.
  • Using the appropriate screwdriver, remove the mounting screws securing the control board in place.
  • Gently pull out the old control board from its position.
  • Align the new control board in the same position as the old one and secure it with the mounting screws.
  • Reconnect the wire harnesses or connectors to the corresponding terminals on the new control board.
Step 6: Accessing the Door Hinges
  • Open the oven door and inspect the hinges. Depending on the issue, you may need to replace one or both hinges.
  • The hinges are typically located on the sides of the oven door and attached to the oven frame.
Step 7: Replace Door Hinges
  • Using the appropriate screwdriver, remove the screws securing the hinges to the oven frame.
  • Carefully lift the oven door off the hinges and set it aside.
  • Install the new hinges in the same position as the old ones and secure them with the screws removed earlier.
  • Place the oven door back onto the hinges and ensure it is properly aligned.
Step 8: Reassemble Control Panel or Rear Panel
  • If you removed the control panel, carefully position it back in place and secure it with the screws removed earlier.
  • If you removed the rear panel, follow the manufacturer’s instructions for safely reattaching it.
Step 9: Reconnect Power
  • Restore power to the range by either plugging it back in or turning on the circuit breaker.
Step 10: Test
  • Test the range by turning it on and ensuring that both the control board and oven door operate properly.
  • Monitor the range during initial use to ensure there are no unusual sounds or behaviors.
By following these steps carefully, you should be able to safely replace the control board and door hinges in your Viking VEDO5302SS range. If you encounter any difficulties or uncertainties during the process, it’s advisable to consult the range’s manual or seek assistance from a professional technician.
Here is a small photo report of the work carried out:

Morgan LLC Services for Chicago Residents

Morgan Appliance Repair is a service known for its exceptional proficiency in repairing household appliances. We offer expert solutions to ensure the seamless operation of your kitchen and bathroom devices. With a proven track record of successfully working with a variety of brands, we provide certified repairs. Schedule your repair today for reliable and prompt service: appliance repair Chicago. Easily locate us on Google Maps at: appliance repair Chicago. Our services extend to Chicago, IL, and all surrounding areas within a 50-mile radius of the city.
Order now